The fit comparison
Compare the published fit limits
The Maidesite gives a frame-only range and published top dimensions. Confirm the measurement reference and top limits for the exact black Desktronic listing.
Scroll across the table for every fit check.
| Model | Height | Worktop | Check first |
|---|---|---|---|
| Maidesite dual-motor frame, black For a lower finished top | 62–125 cm frame only | 100–220 × 60–100 cm, 2 cm minimum listed | Check mass, hardware and rail clearance. |
| Desktronic electric desk frame, black For a higher seated range | 72–119 cm listed | Confirm approved worktop size for this revision | Confirm the height measurement reference. |
Measure the underside as well as the outline
Remove equipment and check the worktop material and condition before you plan the swap. Record width, depth, thickness and mass. Sketch where the old fixings, recesses, edges, drawers and cable holes sit. A nominal 140 × 70 cm top might have bevelled edges or an underside tray that removes the flat area needed for the rails.
Compare that sketch with the exact frame’s drilling drawing and approved top size. Ask whether the material can hold the specified screws and whether the manufacturer permits any old holes to be reused. Keep screws clear of the finished surface and follow the installation instructions. If a honeycomb top has no approved fixing zones for that frame, look for a suitable top rather than relying on a thicker edge.
Maidesite for a lower frame position
The black Maidesite listing gives a frame-only height range of 62–125 cm and lists compatible top dimensions of 100–220 cm wide, 60–100 cm deep and at least 2 cm thick. Confirm those limits against the instructions for the delivered revision. Check the frame’s extendable crossbeam against the top’s flat fixing area at both ends.
For a lower finished top
Maidesite dual-motor frame, black
This black frame-only listing gives a 62–125 cm adjustment range before adding a worktop.
Add the thickness of an approved top. Confirm the exact frame revision and desktop requirements before assembly.
- 62–125 cm frame range
- Top sold separately
- Three-stage lift
With a 30 mm top, the listed frame range gives a theoretical finished range of 65–128 cm, before any extra spacers or floor adjustment. Measure floor to keytops in your seated and standing positions. Work back to the finished top height rather than choosing by frame range alone.
Desktronic for a higher listed range
The black Desktronic frame-only Amazon listing gives 72–119 cm and shows a touchscreen handset. Check the height reference and approved top limits with Desktronic for the exact revision before applying that figure to a finished desk. The top in a frame-only offer is a separate decision.
For a higher seated range
Desktronic electric desk frame, black
This black frame-only listing gives an adjustment range of 72–119 cm and includes a touchscreen handset.
Ask Desktronic to confirm the exact revision, frame-only range and approved top size before reusing a worktop.
- 72–119 cm listed
- Worktop sold separately
- Touchscreen handset
Measure the existing worktop and check whether the handset can mount where you can reach it without catching your knees or chair. If you want to keep a drawer, check the rails and motors against the entire drawer path and the space needed for its fixings. A complete desk is worth comparing if the existing top needs extensive changes to fit.
Check the load and move the finished desk
Use the maker’s lifting limit and confirm which parts it includes. For example, a 23 kg top and 31 kg of equipment create a 54 kg moving load when the maker counts the top. Include the mounts, tray and items you plan to leave on the desk. Check how the load should be distributed, including concentrated loads at the edge.
Follow the exact assembly and setup instructions, with help if needed to handle the top. Once assembled, keep the area clear while testing the intended height range. Check stability, foot clearance, cables and the display at the highest position. Take the desk out of use if the top shifts or a fixing pulls out.
Common questions
Can I reuse a kitchen worktop on a standing desk frame?
Check size, mass, material and the fastening instructions. The top and equipment must fit the frame’s moving load and fixing requirements.
Do old screw holes matter?
Mark them on the drawing. Use only fixings and hole locations permitted for the exact frame and top.
How do I work out the finished height?
Add the top thickness to a frame-only height range and account for spacers or levelling feet if applicable.
Can I keep an existing drawer?
Check the full path of the drawer and runners against the beam, motors and controls. Check thigh clearance at the lowest setting.
What should I weigh?
Weigh the top and add everything carried during travel. Check how the maker defines its rating.
Sources and selection
Sources and Amazon UK listings checked in November 2026. This guide uses published specifications and fitting guidance. Frame dimensions come from the selected Amazon UK listings. Confirm the dimensions and top requirements for the supplied revision.